C-Worthy (R) Message Librarian Data File Version 1.0
COPYRIGHT (C) 1985 - 1989. All Rights Reserved.
Custom Design Systems, Inc. Orem, Utah USA.
Copyright (c) 1987 by Novell, Inc. All Rights Reserved.
DESCRIPTION
The description for this error is not available.
ERROR
Error Report
Further program execution is not possible.
SEVERITY
Program execution should continue normally.
The current operation cannot be completed.
Unable to load overlay file "%s$CS.OVL".
Trace forced to exit because it could not create a portal.
Program Trace Portal
Please Wait
The system error library file "%s" is missing.
The error portal could not be created during program initialization.
The portal control block table is full, and an attempt was made to create another portal.
An attempt to allocate additional memory was unsuccessful.
An attempt was made to create a portal of height %d and width %d.
An attempt to seek to a specific position in the file "%s" failed.
An attempt to read from the file "%s" returned an end of file error. The read request was for %d bytes.
An attempt to read from the file "%s" failed. The read request was for %u bytes.
File "%s" should have had %u bytes read from it.
An attempt was made to push a list on the list stack, and the list stack is already full.
An attempt was made to pop a list from the list stack, and the list stack was empty.
The attempt to display the utility header, with the current date and time, failed.
<Press ESCAPE to continue>
An attempt to allocate %u bytes of additional memory failed.
An attempt to open the file "%s" failed.
An attempt to close the file "%s" failed.
File "%s" should have had %d bytes written to it.
An attempt to write to file "%s" failed. The write request was for %u bytes.
An attempt was made to get the first element in a list and the list was empty.
An attempt was made to get the last element in a list and the list was empty.
An attempt was made to restore the current list from an invalid list buffer number %d.
An attempt was made to save the current list to an invalid list save buffer number %d.
An attempt to free a section of memory that was previously allocated failed.
The bindery is locked. Normally the bindery is only locked if the supervisor is doing a backup of the entire SYS: volume. No information can be obtained until the supervisor unlocks the bindery.
An attempt was made to attach to server "%s" and that server did not respond.
An attempt was made to attach to server "%s", but that server is not presently connected to this network.
An attempt was made to attach to server "%s", but this station already has attachments to the maximum allowed number of file servers. You must detach from a server before you can attach to any more servers.
An attempt was made to attach to server "%s", but that server does not have any free connection slots. Another user must detach from it before you can attach to it.
An attempt was made to attach to server "%s", and you were already attached to it.
An attempt was made to get information about server "%s", and that server did not supply the information.
An attempt was made to get the bindery object "%s"'s property value "%s", but its value could not be obtained from the server bindery.
January
February
March
April
August
September
October
November
December
Sunday
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
An attempt was made to write to the bindery object "%s" property "%s", but the information could not be written to the bindery.
An attempt was made to create the bindery object "%s" property "%s", but the property could not be created.
An attempt was made to delete the bindery object "%s" property "%s", but the property could not be deleted.
An attempt was made to get the name from the bindery corresponding to object #%08lx. The attempt failed.
An attempt was made to get the current portals information, and there was not a currently selected portal.
An attempt to create the file "%s" failed.
The string that was passed to EditPortalString was longer than the maximum length allowed. Possibly the string was not properly initialized.
Server:
The file name "%s" could not be converted to a full path specification.
An attempt to change the file attributes of file "%s" failed. The mode was %d.
Primary Server:
WARNING! This station has no primary server.
The procedure "EditText" failed because the default text was longer than the specified maximum length.
Cancel All Changes
Save Changes
The Paste Buffer Is Empty.
The Text Buffer Is Full.
No Insertions Allowed While Mark Is On.
The Marked Block Is Too Big For Available Memory.
There Are No Characters In The Marked Block.
The file name "%s" could not be converted to a path specification.
An attempt was made to set Dynamic Message Number %d. There is no such dynamic message pointer.
The help file "%s" is the wrong version.
An attempt to get the server name of the server connected at slot %d failed.
The Help Librarian Data File "%s" could not be found. The help system will not be able to provide some contextual help for this utility.
The Help Librarian Data File "%s" could not be read. The help system will not be able to provide some contextual help for this utility.
The Help Librarian Data File "%s" is the wrong version. The help system will not be able to provide some contextual help for this utility.
No application specific help is available at this point. Pressing the HELP key again will display a list of the function key assignments on your machine.
The text to be displayed in the current portal was too long to fit in the portal.
There is not a currently selected portal in which to display the text.
There is no preceding help screen.
This is the last help screen.
The following keys are available while viewing help:
PAGE UP
Backs up to the previous help screen.
PAGE DOWN
Moves to the next help screen.
Displays a list of the function key assignments on your machine.
ESCAPE
Exits help.
No Server Attached
A read error occurred while reading the overlay file "%s$RUN.OVL".
The overlay file "%s$RUN.OVL" is the wrong version for this utility.
GetMessage was called, but no message was specified.
GetMessage was called, but the requested system message has been deleted.
An unknown procedure
GetError was called, but the specified procedure has been deleted.
Back up to the previous level.
Exit the program.
CANCEL
Cancel markings or edit changes.
BACKSPACE
Delete the character to the left of the cursor.
INSERT
Insert a new item.
Delete an item.
DELETE
MODIFY
Rename/modify/edit the item.
SELECT
Accept information entered or select the item.
This station doesn't have the privileges needed to create objects in the bindery.
Provide on-line help.
Toggle marking for current item.
CYCLE
Cycle through menus or screens.
Move up one line.
Move down one line.
Move left one position.
RIGHT
Move right one position
SPECIAL UP
Move to the very beginning.
SPECIAL DOWN
Move to the very end.
Move to the left-most position on the line.
SPECIAL RIGHT
SPECIAL LEFT
Move to the right-most position on the line.
Move up one page.
Move down one page.
FIELD LEFT
Move left one field or word.
FIELD RIGHT
Move right one field or word.
Special function 1.
Special function 2.
Special function 3.
Special function 4
Special function 5.
Special function 6.
Special function 7.
Special function 8.
Special function 9.
Special function 10.
The function key assignments on your machine are:
No More Help Available.
GetListIndex was called with the element "%s", but that element was not found in the currently selected list.
AlignChangedList was called with the element "%s", but that element was not found in the currently selected list.
AlignListDisplay was called with the element "%s", but that element was not found in the currently selected list.
An attempt to remove the file "%s" failed.
An attempt to rename the file "%s" to "%s" failed.
Change Modes.
PushHelpContext was called to push the help context number %d, but the help context stack is already full.
An attempt was made to return to the previous help context, but there is no previous help context on the help context stack.
An attempt was made to set the help context to number %d, but there are only %d help contexts defined (help context numbers are zero based).
The object or property name specified may not contain illegal characters. Illegal characters include control characters, the comma, colon, semicolon, slash, backslash, question mark, asterisk, and the tilde.
The object specified already exists in the bindery.
The specified property already exists for the object.
This station does not have the necessary security privileges to create or change a property for the given object.
The data file was not of the correct type.
The data file format is the wrong version.
A read error occurred while reading the data file.
Connection information about connection number %d could not be obtained.
The Palette Stack Is Full.
The Palette Stack Is Empty.
*** ERROR REPORT ***
Press a key when ready ...
The message queue is full.
There is either a lack of dynamic workspace, or an I/O failure.
An attempt was made to erase the file pattern "%s", but some of the files in this directory are currently in use by another station.
An attempt was made to delete directory "%s", but the directory is currently being used by another station.
The system failed to append the given text to the current spool capture file.
An attempt to change the object password failed.
An attempt to copy file "%s" to file "%s" failed.
An attempt to create a temporary drive handle failed.
An attempt to deallocate a drive handle failed.
An attempt to delete the file "%s" failed. The file is either in use or queued to be printed.
An invalid drive was used.
The specified directory cannot be found.
Server "%s" cannot be found.
An attempt to get the specified printer defaults failed.
The specified printer cannot be found on the destination server.
An attempt to get information about the preferred server failed.
An attempt to get directory trustee paths and access level of objectID %lx on volume %d failed.
Invalid drive handle was used.
Volume number %d is out of range (0 - n), where n is the maximum number volumes supported by the file server.
Specified server "%s" is not attached.
File %s cannot be found.
You have no right to change to mode of the file "%s".
You have no right to create the directory "%s".
The directory "%s" already exists.
The print queue is full or the specified printer does not exist. Try to print the files at a later time.
Unable to recognize date, or day exceeds number of days in month.
Invalid parameters encountered.
Specified path is not locatable.
Specified Drive in path %s is not a local drive.
Target and path separate local drives
Value must be between %d and %d inclusive.
The specified volume cannot be found.
DOS environment could not be found.
Environment variable "%s" could not be found in DOS environment.
No error is returned from this function call.
Connection number %d is invalid.
New environment size is larger than the maximum size available. The new variable is "%s".
Specified server in path %s can not be found.
Specified server in path %s is not attached.
Drive %c is not a local drive.
An attempt to get the name of objectID %lx was unable to find the object in the file server's bindery.
An attempt to get the name of object ID %lx was unsuccessful.
An attempt to add a new property to the bindery object "%s" failed. The new property was "%s".
An attempt to allocate additional memory to add element "%s" to the current list was unsuccessful.
An attempt to get status of printer %d failed.
"FORM FIELD"
An attempt to allocate additional memory to add a field to the current form was unsuccessful.
An attempt to add trustee ID %lx to the specified directory failed.
An attempt to delete trusteeID %lx from the specified directory failed.
An attempt to scan the specified directory for its trustees failed.
An attempt to get the server number of drive %c failed.
An error occurred copying from file "%s" to file "%s". %lu bytes of the requested %lu bytes were copied.
Invalid or unknown time format.
Invalid code returned from field edit routine.
An attempt to rename the file "%s" to "%s" failed because the specified path does not exist.
An attempt to rename the file "%s" to "%s" failed because a file by the same name as the destination file already exists.
An attempt to rename the file "%s" to "%s" failed because the file is currently in use.
An attempt to rename the file "%s" to "%s" failed because a bad directory handle was specified.
An attempt to rename the file "%s" to "%s" failed because an illegal file name was specified.
An attempt to rename the file "%s" to "%s" failed because this station has no file rename privileges in the specified directory.
An attempt to rename the file "%s" to "%s" failed because the file server is out of dynamic workspace.
Sorry, this field cannot be modified!
Save and Exit
Cancel and Exit
Do Not Exit
Verify Field Exit
Verify Form Exit
%s returned an error code of %d.
Specified Directory Does Not Exist.
Invalid File Server Specified.
Invalid Volume Name Specified.
You Are Not Logged In To Server %s.
File Server %s Is Unknown.
Invalid Drive %c: Specified.
Only Local Directories Can Be Selected.
Only Network Directories Can Be Selected.
Only Local Drive %c: Is Allowed.
Only Directories On File Server %s Are Allowed.
Volume %s Does Not Exist.
You Cannot Change Users On A Local Drive.
You Cannot Logout From A Local Drive.
NetWork Directories
Local Directories
(Local Drive)
File Servers/Local Drives
Volumes
Access Denied.
Access To File Server Denied.
Default User Cannot Be Changed.
You Cannot Log Out From Your Default Server.
File Server User Name
Logout From All Marked Servers
Logout From Server
You Are Already Logged In To The Maximum Number Of Servers.
New User Name:
Network Drive
On File Server
Connection
Other File Servers
Password:
User Name:
Specified Directory Does Not Exist.
Value must be between %ld and %ld inclusive
Value must be between %u and %u inclusive.
Mark Pattern:
Unmark Pattern:
Value must be between %s and %s inclusive.
Control characters not allowed in passwords.
Version 3.0 Compiler Required
An attempt to Seek within the Source file failed.
An attempt to Read a record from the Source file failed.
An attempt to Write to the temporary file failed.
You Cannot Log Out From Your Primary Server.
Unable to Set the Key Description for the Function Key %d.
Mark pattern.
UnMark pattern.
An attempt to unlink the file "%s" failed because the file was not found.
An attempt to unlink the file "%s" failed because the specified path was not found.
An attempt to unlink the file "%s" failed because access was denied.
An attempt to get the DOS country information failed because the alternate keyboard handler file was not found.
An attempt to rename the file "%s" to "%s" failed because the specified file was not found.
An attempt to rename the file "%s" to "%s" failed because the specified path was not found.
An attempt to rename the file "%s" to "%s" failed because access was denied.
An attempt to rename the file "%s" to "%s" failed because the destination device was not the same.
An attempt to duplicate a file handle failed because there are too many open files.
An attempt to duplicate a file handle failed because the specified file handle was invalid.
An attempt to remove the directory "%s" failed because the specified directory was not found.
An attempt to remove the directory "%s" failed because access was denied.
An attempt to remove the directory "%s" failed because the specified drive is invalid.
An attempt to close the file "%s" failed because the specified file handle is invalid.
An attempt to seek to a specific position in the file "%s" failed because the mode is invalid.
An attempt to seek to a specific position in the file "%s" failed because the handle is invalid.
An attempt to create the file "%s" failed because the specified directory was not found.
An attempt to create the file "%s" failed because there are too many open files.
An attempt to create the file "%s" failed because access was denied.
An attempt to open the file "%s" failed because the specified files was not found.
An attempt to open the file "%s" failed because the specified directory was not found.
An attempt to open the file "%s" failed because there are too many open files.
An attempt to open the file "%s" failed because access was denied.
An attempt to open the file "%s" failed because the specified access code is invalid.
An attempt to read from the file "%s" failed because access was denied. The read request was for %u bytes.
An attempt to read from the file "%s" failed because the specified file handle was invalid. The read request was for %u bytes.
An attempt to create the directory "%s" failed because the specified path was not found.
An attempt to create the directory "%s" failed because access was denied.
An attempt to write to the file "%s" failed because access was denied. The write request was for %u bytes.
An attempt to write to the file "%s" failed because the specified file handle was invalid. The write request was for %u bytes.
An attempt to get the DOS country information failed.
An attempt to duplicate a file handle failed.
An attempt to remove the directory "%s" failed.
The combined width of the program header and the version number is greater than 34. This means that the header will be overwritten by the date and time for certain days in certain months (ie. Wednesdays in September). Please shorten the header message.
Change Expired Password
The Supervisor Has Disabled The Login Function On File Server %s. Access Denied.
Your Password Has Expired. Please Change It.
Your Password Has Expired and All Grace Logins Have Been Used. Access Denied.
This Station Is Not Authorized To Login To This Account On File Server %s. The Supervisor Has Limited The Stations That Are Allowed. Access Denied.
You Are Not Authorized To Login During This Time Period. The Supervisor Has Limited The Times That This User Account Can Be Accessed. Access Denied.
This Account Has Expired Or Has Been Disabled By The Supervisor. Access Denied.
Too Many Stations Are Already Attached To File Server %s Using This Account. The Supervisor Has Limited The Number of Concurrent Connections. Access Denied.
This Account Has Been Locked Because Of Intruder Detection. Access Denied.
The Account Balance For This Account Has Dropped Below The Minimum. Access Denied.
This Account Has No Accounting Balance On File Server %s. Access Denied.
Enter New Password:
Retype New Password:
New Password Not Retyped Correctly.
The New Password Is Not Long Enough.
The New Password Is A Duplicate Of A Previously Used Password.
Password Not Changed.
Enter Old Password:
An Explicit Transaction Is Already Active.
An Implicit Transaction Is Already Active.
No Explicit Transaction Was Active.
The Explicit Transaction Ended; However, Records Were Left Locked.
The Transaction Has Not Yet Been Written To Disk.
The Caller Does Not Have PERSONAL And MODIFY Access Rights.
File Server Is Out Of Dynamic Memory.
File Server %s Is Running Advanced NetWare Version %d.%02d-%d. This Utility Requires Advanced NetWare Version %d.%02d-%d or Greater.
File Server %s Is Running System Fault Tolerant Level %d. This Utility Requires System Fault Tolerant Level %d or Greater.
File Server %s Is Running Transaction Tracking System Level %d. This Utility Requires Transaction Tracking System Level %d or Greater.
This Utility Requires NetWare Version %d.%02d-%d or Greater And System Fault Tolerant Level %d and Transaction Tracking System Level %d.
You Are Not Logged Into File Server %s. You Must Be Logged In To Use This Utility.
The new bindery object "%s" could not be created. The maximum number of bindery objects specified during installation has been reached. You must run NETGEN and increase the number of bindery objects allowed on this file server.
An attempt to allocate %d file handles failed, must be in the range of 5 to 260.
An attempt to close a file in the extended table failed.
Primary User Cannot Be Changed.
Abandon Changes
There is 1 required field that has not been answered.
There are %d required fields that have not been answered.
Edit Unanswered Field
Edit First Unanswered Field
Cancel All Changes And Exit
Tentative
Answered
Unanswered
Invalid
Mark Field
through
%s is not valid. The value must be in the range
Continue Edit
Cancel Edit
Leave Invalid
Leave Unanswered
Special variable argument handling error at %d: the number of bytes of arguments in va_Special_start does not match the number of bytes actually pushed on the stack.
File path is too long.
The workstation must be logged in as a console operator or supervisor equivalent to use this function.
Attempt was made to convert a string longer than 255 characters to a length preceeded ASCII string.
The logged object must have account privileges to use this function.
Attempt was made to access accounting information for an object that has no account balance.
Attempt was made to charge an account that would exceed that accounts credit limit.
An attempt was made to place a hold on an object that already has the maximum number of holds applied.
An attempt was made to convert a length preceeded string will embedded nulls to an ASCIIZ string.
The file server does not have enough memory to complete the request.
Either the file belonging to the file handle could not be closed or the bindery failed.
The file was successfully closed, but the queue job could not be started.
An error occured attempting to get a path from a directory entry.
This call failed because a bad directory handle (%d) was passed.
Error %d occured while attempting to get a directory path from a directory handle.
local
UNKNOWN
Search
Create Queue was passed an invalid queue name (%s).
The underlying NCP request is not known to the server.
Group
Print Queue
File Server
Job Server
Gateway
Print Server
Archive Queue
Archive Server
Job Queue
Administration
NAS SNA Gateway
Remote Bridge Server
Time Synchronization Server
Archive Server (Dynamic SAP)
Advertising Print Server
BTrieve VAP
Print Queue User
Unknown Bindery Object Type
Wild Card Object Type
Error %d was detected while reading a string on the input stream %s.
You have no rights to volume %s
The object specified does not exist in the bindery.
An unkown error occurred during a bindery function.
The segment specified does not exist in the propertyfor this bindery object.
This bindery function does not allow wildcard specifiers.
The requestor has an invalied security level for this bindery function.
The requestor does not have read privileges for thisbindery property.
The property specified does not exist for this bindery object.
(.txt)